Wall Mount for older MiniPod (MK1, MK2, MK3)

Are you looking for a wall mount for an older model of our MiniPod? Unfortunately, we do not have any more wall brackets of the type you require - they were discontinued some years ago. But our new MiniPod wall bracket fits the size of your speakers just fine - but unfortunately there are no bushings in your speakers to fasten the bracket and speaker.

If you are a bit "handy" or maybe know a carpenter, you can attach the bracket with 3 good wood screws or self-tapping screws - it just requires drilling down the bottom of the speaker so the plastic does not "crack" when you tighten the screws.

In the manual (which you will find through this link), the screws on page 7 at the bottom need to be replaced with wood screws or self-tapping screws, they should be approximately 70mm long - you can probably find some in your local DIY shop.

You'll find the wall mount through this link. We do recommend laying the speakers on a soft surface / cloth so they don't get scratched when you "work" with them.

If you have any questions concerning this, please contact hello@podspeakers.com for further help. You can find the wall mount here.